Stalling Weed Eater Engine Repair . No one appreciates the inconvenience of getting ready to tidy up their front yard and not being able to do so, because the weed eater refuses to start and coughs up a storm in response to all your efforts. A stalling gas-powered weed eater engine doesn’t signify the end of your weed eater’s life – it can actually be repaired quite easily, with these steps we’re going to show you. Take a look. You first, have to check out the engine’s condition by doing the following: – Attempt to turn on the weed eater and listen for any engine activity. – See if the engine will react or try to start when you pull the string on the weed eater or when you turn it on with the on/off switch. – If you notice that the engine sputters before it dies when you put it on, but that’s actually better than an engine that is completely frozen. You secondly have to remove the filter by doing the following: – Check the air filter to see if it’s wide open or tightly closed. – If the air filter is wide open, your engine will be getting too much air. – If the air filter is tightly closed, then your engine won’t get any air and the engine will stall. – Ensure that you install the filter correctly and open it just enough so that the engine gets sufficient air to function properly. – Turn on the weed eater after you have adjusted the filter and see if it keeps on choking. If it doesn’t choke and continues functioning smoothly, then you have solved the problem. If not, you should keep on trying. You thirdly have to check the fuel by doing the following: – The reason your weed eater may cough and sputter, then die, may be because of a lack of fuel in your machine. – Check the fuel tubing to see if it is disengaged or damaged. Engage it or replace it and then test out the weed eater again. You fourthly have to check the spark plug by doing the following: – See if the spark plug is corroded, damaged or not installed properly and then replace it, so that the engine’s electrical connections will begin working well again and the engine will start. Finally, you have to check the screws by doing the following: – See if the high and low screws in your weed eater can be what’s causing your weed eater not to start. – Ensure that all the screws are in their designated positions. – Adjust them each, by half turns in the opposite directions and try starting the weed eater again.. If you are looking for small engine repair services in Ottawa, mobile car battery boosting, lawn mower and lawn tractor repairs and tune-ups, or snow blower repairs then give us a call to book your mobile small engine repair today. We fix, repair, and tune-up small engines such as lawn mowers and snow blowers and home generators. The best part is that we come to you so no more waiting in line or traveling back and forth to fix your small engine equipment. Also if you are looking for generator repair services in Ottawa to ensure that you have sufficient power for your home if the power goes out then give us a call to book your mobile power generator repair today. We fix, repair, and tune-up all major brands of home generators to keep your powered up during power outages. The best part is that we come to you so no more waiting in line or traveling back and forth to fix your power generator for your home in Ottawa.. http://www.doityourself.com/stry/how-to-repair-a-stalling-weed-eater-engine#b